| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Anyone used a Proxxon MOF Micro Router? http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=43892 |
Page 1 of 1 |
| Author: | Colin North [ Mon Jul 28, 2014 6:03 pm ] |
| Post subject: | Anyone used a Proxxon MOF Micro Router? |
Anyone here have experience of the Proxxon MOF Micro Router? - precision collets, 130 watt (1/5 hp), 27,500 rpm. Attachment: proxxon router.jpg I'm thinking of maybe using this with a Wells/Karol circle jig. |
|
| Author: | theguitarwhisperer [ Tue Jul 29, 2014 9:03 pm ] |
| Post subject: | Re: Anyone used a Proxxon MOF Micro Router? |
I guess not... |
|
| Author: | meddlingfool [ Tue Jul 29, 2014 10:42 pm ] |
| Post subject: | Re: Anyone used a Proxxon MOF Micro Router? |
Well, I don't know what those stats mean, but it looks even less powerful than a dremel. I know I want to upgrade to a laminate trimmer for rosettes. Tired of nursing the dremel... |
|
| Author: | Haans [ Wed Jul 30, 2014 7:54 am ] |
| Post subject: | Re: Anyone used a Proxxon MOF Micro Router? |
I have an old PC and a Makita and neither one of them has a good micro adjust height base. That seems to be the bane of lamiate trimmers. Only one I see as working is a larger DeWalt with radial groove in the plastic (?) housing... Don't mind the slow work of the Stew-Mac rosette cutter myself because it has a micro adjust height, but if I were to ever switch, I probably would go to a drill press type fly cutter and a VG drill press. |
|
| Author: | meddlingfool [ Wed Jul 30, 2014 9:30 am ] |
| Post subject: | Re: Anyone used a Proxxon MOF Micro Router? |
The Ridgid's have an excellent micro adjust. I want a setup that I can use with it... |
|
| Author: | Goat Rock Ukulele [ Wed Jul 30, 2014 10:48 am ] |
| Post subject: | Re: Anyone used a Proxxon MOF Micro Router? |
I use one for all my rosette work, way better than dremel. I was using a bosh lam router before but love the Proxxion. It's important to me to be able to use the 1/8" in multi faceted router bits. They never tearout or do anything bad. I realize I could simply get a 1/8" collet for the bosh but the proxxion is just right for the job. |
|
| Author: | Haans [ Wed Jul 30, 2014 4:11 pm ] |
| Post subject: | Re: Anyone used a Proxxon MOF Micro Router? |
meddlingfool wrote: The Ridgid's have an excellent micro adjust. I want a setup that I can use with it... Well, there you go then...go for it. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|